Products
Main Image
 
  • fda800-400x400
  • fda800-TC-400x400
  • fda800-a-400x400
Technical Specification
  
Size1/2"
ConnectionNPT x NPT
Weight (lbs)1.5
DimensionSee Dimensional Drawing
Max. Operating Pressure (psig)150
Max. Allowable Pressure (psig)230 PSIG @ 850°F
Max. Allowable Temperature850°F @ 230 PSIG
Material Specification
  
BodyStainless Steel,AISI 316L
DiscStainless Steel,AISI 316L
CapStainless Steel,AISI 316L
Cross Reference
  
Spirax Sarcon/a
FDA800-12-NPNP
QTY :
Product Overview
DRIP: The FDA800 Series thermodynamic clean steam traps are used as drip traps on steam mains in CIP/SIP systems and drainage for separators and filters.
Features
• Small and compact
• All 316L stainless steel components
• Works in any position (horizontal preferred)
How It Works
Using the thermodynamic properties of flash steam, this trap features a disc that is pushed open by incoming condensate, then closes tightly when steam enters the trap. Because it normally operates in an open position, condensate is continuously discharged from the line. Steam entering the trap creates an internal pressure that forces the valve to close tightly, preventing the steam from escaping.
Selection / Sizing / Capacities

The steam traps shall e a thermodynamic disc type with an all 316L stainless steel construction and integral seat design. Unit shall be capable of installation in any orientation and self-draining whern munted vertically


?Note: Maximum back pressure not to exceed 80% of inlet pressure. 
Dimension and Weights